Mobile Vehicle Barrier (Towable) 20ft opening

NMSB XVX-20 M40 (K8) Mobile and Portable Barrier

NMSB XVX-20 | Mobile Barrier (M40)

The NMSB XVX-20 is a 20ft clear opening mobile barrier used for severe-threat security areas that are frequented by large trucks, construction equipment, and military vehicles.

The barrier clear opening is 20 feet. In the up position the top of the barrier is 36″ above the road surface.

The hydro-electric operator system uses biodegradable hydraulic oil. Standard barrier deployment time is 4-6 seconds. No weight restrictions are placed on vehicles traveling over this barrier.

This barrier does not require excavation thus does not mark or damage the roadway surface. Easy to use leveling feet allow the barrier to be adjusted to site-specific elevations.

Variations of the NMSB-XVX-20 Mobile Barrier

• NMSB XVX-20-P – Portable version of the barrier where the towing function is not included
• NMSB XVX-20-MAX – A deployment method for the NMSB-XV mobile barrier family, where four jersey walls weighing a total of 18,000 lbs. are placed behind the buttresses of the barrier.

The NMSB XVX-20 has been successfully crash tested using the ASTM F2656-07 standard and has a M40 rating, equivalent to K8.

Portable Vehicle Barrier 16ft opening

NMSB XVI-P | Relocatable Portable Barrier (M40)

NMSB XVI-P | Relocatable Portable Barrier (M40)

The NMSB XVI-P is a relocatable, portable barrier used for intermediate-threat security areas requiring versatile perimeter protection. The NMSB XV-P utilizes either a crane or forklift for rapid deployment. This unit, standalone and non-anchored is certified to STOP a 15,000-pound vehicle traveling at 40 mph. The barrier clear opening is 16ft. In the up position the top of the barrier is 31″ (78.7 cm) above the road surface.

 

Hot-dip galvanized for years of service. EPA approved self-contained attached housing unit. The standard barrier deployment time is 3-5 seconds. NO weight restrictions. The barrier is normally operated manually, though hydraulic operation is an option. This barrier does not require excavation thus does not mark or damage the roadway surface. Custom configurations are available.

The NMSB-XVI has been successfully crash tested using the ASTM F2656-07 M40 standard, equivalent to K8.

Mobile Vehicle Barrier (Towable) 16ft opening

NMSB XVI M40 (K8) Single Butress Bolt Down

NMSB XVI | Mobile Barrier M40 (K8)

The NMSB XVI is a 16ft clear opening mobile barrier used for severe-threat security areas requiring versatile perimeter protection. The NMSB XVI can be towed behind a standard pickup truck and deployed in under 12 minutes. This unit, standalone and non-anchored is certified to stop a 15,000-pound vehicle traveling at 40 mph. The barrier clear opening is 16 feet. In the up position the top of the barrier is 31″ (78.7 cm) above the road surface.

 

All Nasatka mobile barriers are hot-dip galvanized for years of service. The hydro-electric operator system uses biodegradable hydraulic oil within it’s self-contained integrated housing unit. Standard barrier deployment time is 3-5 seconds. No weight restrictions are placed on vehicles traveling over this barrier. This barrier does not require excavation thus does not mark or damage the roadway surface. Easy to use leveling feet allow the barrier to be adjusted to site-specific elevations.

 

Variations of the NMSB XVI Mobile Barrier
• NMSB XVI-M – Manual only, spring-assist operated version of this mobile barrier
• NMSB XVI-P – Portable version of the barrier where the towing function is not included
• NMSB XVI-MAX – A deployment method for the NMSB-XVI family, where four jersey walls weighing a total of 18,000 lbs. are placed behind the buttresses of the barrier.

 

The NMSB XVI has been successfully crash tested using the ASTM F2656-07 M40 standard, equivalent to K8.
Resources

Portable Vehicle Barrier 12ft opening

NMSB XV-P | Relocatable Portable Barrier M30 (K4)

The NMSB XV-P is a relocatable, Portable barrier used for intermediate-threat security areas requiring versatile perimeter protection. The NMSB XV-P utilizes either a crane or forklift for rapid deployment. This unit, standalone and non-anchored is certified to STOP 15,000-pound vehicle traveling at 30 mph. The average barrier opening is 12′ (3.66 meters). In the up position the top of the barrier is 31″ (78.7 cm) above the road surface. Hot-dip galvanized for years of service. EPA approved self-contained attached housing unit.

 

Standard barrier deployment time is 3-5 seconds. NO weight restrictions. The barrier is normally operated manually, though hydraulic operation is an option. This barrier does not require excavation thus does not mark or damage the roadway surface. Custom configurations are available.

 

The NMSB-XV has been successfully crash tested using the ASTM F2656 07 M30 standard, equivalent to K4.

Mobile Vehicle Barrier (Towable) 12ft opening

NMSB XV | Mobile Barrier M30 (K4)

NMSB XV M30 (K4) Mobile and Portable Barrier

The NMSB XV is a 12 ft. clear-opening mobile barrier used for severe-threat, security areas requiring versatile perimeter protection. The NMSB XV can be towed behind a standard pickup truck and deployed in under 12 minutes. This unit, standalone and non-anchored, is certified to stop a 15,000-pound vehicle traveling at 30 mph. The barrier clear opening is 12 ft. (3.66 meters). In the up position, the top of the barrier is 31 in. (78.7 cm) above the ground. All Nasatka mobile barriers are hot-dip galvanized for years of service.

The hydroelectric operator system uses biodegradable hydraulic oil within its self-contained, integrated housing unit. Standard barrier deployment time is three to five seconds. No weight restrictions are placed on vehicles traveling over this barrier. This barrier does not require excavation, thus does not mark or damage the roadway surface. Easy-to-use leveling feet allow the barrier to be adjusted to site-specific elevations. Easy to use leveling feet allow the barrier to be adjusted to site-specific elevations.

Variations of the NMSB-XV Mobile Barrier
• NMSB-XV-M – Manual only, spring-assist operated version of this mobile barrier
• NMSB XV-P – Portable version of the barrier where the towing function is not included
• NMSB XV-MAX – A deployment method for the NMSB-XV family, where four jersey walls weighing a total of 18,000 lbs. are placed behind the buttresses of the barrier.

The NMSB-XV has been successfully crash tested using the ASTM F2656 07 M30 standard.